Proxmark3 community

LawPoh

Member

Registered: 2013-03-19

Posts: 8

hf mf chk/ hf mf mifare keeps stopping automatically

Anyone is experiencing the hf mf chk *1 ? t command stops automatically after reader Sector 1?

proxmark3> hf mf chk *1 ? t
No key specified,try default keys
chk default key[0] ffffffffffff
chk default key[1] 000000000000
chk default key[2] a0a1a2a3a4a5
chk default key[3] b0b1b2b3b4b5
chk default key[4] aabbccddeeff
chk default key[5] 4d3a99c351dd
chk default key[6] 1a982c7e459a
chk default key[7] d3f7d3f7d3f7
chk default key[8] 714c5c886e97
chk default key[9] 587ee5f9350f
chk default key[10] a0478cc39091
chk default key[11] 533cb6c723f6
chk default key[12] 8fd0a4f256e9
--SectorsCnt:0 block no:0x03 key type:A key count:13
Found valid key:[ffffffffffff]
--SectorsCnt:1 block no:0x07 key type:A key count:13
_

The board seems to blink once and goes dead after that.  I've tried it with different cards and they all give me the same situation.

Same for the mifare command....it stops automatically with the never ending ............ even after 2 hours.

Is this normal?

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: hf mf chk/ hf mf mifare keeps stopping automatically

Having the same problem, but it seems to stop after the sectorCnt after "Found vaild key [fffffffff]" entry for me.