Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Using t708 and r709 I receive this answer form PM3:
hf mf cgetsc 0
--sector number:00
block 00 data:44 44 44 44 8e f4 ef e5 cc cd c3 65 53 c7 71 6b
block 01 data:44 44 44 44 ab 30 c8 09 c5 80 50 0b 07 be 10 a2
block 02 data:44 44 44 44 32 cd 52 98 61 4f 90 8a 04 40 2e 80
block 03 data:44 44 44 44 64 e0 c4 5b 24 75 c4 41 02 25 81 02
and
hf mf cgetblk 0
--block number:00
block data:44 44 44 44 8e f4 ef e5 cc cd c3 65 53 c7 71 6b
All those 44 44 44 means something wrong...
also, form r709 only (r708 was working) I am not able to use the csetblk:
hf mf csetblk 3 00000000000000000000000000000000
--block number:03 data:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
#db# Can't select card
Can't write block. error=2
and using the special chinese card as a mifare card I have this:
hf mf rdbl 3 A 000000000000
--block no:03 key type:00 key:00 00 00 00 00 00
#db# Can't select card
#db# READ BLOCK FINISHED
isOk:00
Can anyone confirm ?
Is it possible that I "destroyed" the chinese card writing casual bytes to sector0 ?
Last edited by asper (2013-05-06 10:46:21)
Offline
Pages: 1