Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
After finally getting how the iso14443-B functions in the proxmark firmware actually work, I added support for reading the contents of SRI512 memory tags: simple open spec'ed ISO14443-B tags which contain 16 blocks of 4 bytes.
The new "sri512read" function does tag wake-up, select and loops through the memory. Nothing special, but it does the job.
One note though: I often get errors on the CRC value when reading the tags, though the first bytes are always OK...
Code is checked in in SVN on google code (http://code.google.com/p/proxmark3/),
Last edited by edo512 (2009-04-16 09:57:16)
Offline
Sweet!
I'm currently researching support for Felica tags. I finally have my NFC reader working with a Octopus card from HongKong using libnfc.
Connected to NFC reader: ACR122U102
The following (NFC) Felica tag was found:
ID (NFCID2): 01 01 05 01 07 0a 0b 25
Parameter (PAD): 03 01 4b 02 4f 49 93 ffMaybe we should make a overview (in the manual?) where we describe which (type of) cards are supported. I'm thinking of a table with Manufacturer, Tag-name, frequency (125/134/13.56), Modulation type (R->T, T->R), supported(none,progress,done), etc.
What do you think of this?
Cheers,
Roel
Offline
Maybe we should make a overview (in the manual?) where we describe which (type of) cards are supported. I'm thinking of a table with Manufacturer, Tag-name, frequency (125/134/13.56), Modulation type (R->T, T->R), supported(none,progress,done), etc.
What do you think of this?
Indeed, it's a good idea. There are so many improvements lately it's becoming difficult to keep track, a table overview would be good.
A first try is there...
Last edited by edo512 (2009-04-16 11:14:52)
Offline
nice! did we also have (working) support for HID tags?
Offline
nice! did we also have (working) support for HID tags?
Yes.. Added. Let's continue discussing the table in the "manual" section ?
Offline