Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2013-07-26 06:25:16
- Pitiya
- Member
- Registered: 2013-07-26
- Posts: 4
Proxmark standalone support for Mifare
Is there any firmware for proxmark 3 which enables it to read UID's from mifare cards in standalone mode?
Offline
#2 2013-07-26 13:54:48
- moebius
- Contributor
- Registered: 2011-03-10
- Posts: 206
Re: Proxmark standalone support for Mifare
AFAIK Nope, but it's easy to implement. You can also do that with a simple arduino UNO + nfc shield (+ lcd shield) 
be good.
Offline
#3 2013-07-27 04:38:24
- Pitiya
- Member
- Registered: 2013-07-26
- Posts: 4
Re: Proxmark standalone support for Mifare
Can U please show me a small example of how to do that. I'm novice in programming field 
Sorry...
Offline
#4 2013-07-27 21:44:00
- moebius
- Contributor
- Registered: 2011-03-10
- Posts: 206
Re: Proxmark standalone support for Mifare
If you want an example using Arduino, this is not the forum to talk about, but you can mail me and I'll send you how to do that.
If you're talking about coding inside Proxmark3, just take a look at two pieces of code: The one that does the Collect UID's and then look for "stand-alone" and you'll find out how to mix both stuff together.
Have fun!
Offline
#5 2013-07-28 04:04:44
- Pitiya
- Member
- Registered: 2013-07-26
- Posts: 4
Re: Proxmark standalone support for Mifare
Thanks Moebius you are very helpful 
Can I have your email address please?
Offline
#6 2013-07-28 22:21:39
- moebius
- Contributor
- Registered: 2011-03-10
- Posts: 206
Re: Proxmark standalone support for Mifare
Just sent you an email to the one you've declared during your registration at the forum.
Offline
Pages: 1