Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Okay I hope I didn't mess this up I restored but restored a dump to two cards a normal mifare classic 1k and one that is block zero writable then i tried to restore a different dump to the 0 writable card and im getting:
#db# Cmd Error: 04
#db# Write block error
#db# WRITE BLOCK FINISHED
isOK:00
I can manually write to the card using "hf mf csetblk" but i cant dump the card either because i get
#db# Cmd Error: 04
#db# Write block error
#db# WRITE BLOCK FINISHED
Could not get access right for block
i also get the same for trying to restore and write blocks to the regular card.
What am i missing did i mess up my 0 writable card and can i even rewrite data on the regular 1k cards?
Offline
Does anyone have any answers.
Offline
Full traces setting the debug level 'hf mf dbg X' where X is between 1-5, and using hf 14a list, after the error might help diagnose the problem.
Offline
Pages: 1