Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hi there,
Could someone please confirm that after 3 way authentication (60 or 61) the parity bit in a fame is calculated on the plain data.
i.e does the mifare card receive a frame, decrypt the frame and then test the parity bits for every byte. I know the last 2 bytes (CRC) are calculate over the data payload appended and then the payload including CRC is encryped (as an example replying to a block read 30).
If the parity is done on plain data this has an obvious impact on a ISO14443A compatible RF receiver / transmitter module.
Look forward to any comments...
Alex.
Offline
Just to further add:
I'm talking about standard frames - NOT short frames.
Standard frame:
SOF, 1st byte, odd parity 1st byte, 2nd byte, odd parity 2nd byte, Nth byte, odd parity Nth byte, EOF
Offline
Pages: 1