Proxmark3 community

Bearit641

Contributor

Registered: 2021-02-01

Posts: 4

Cannot Read a 1K Mifare Cassic

Hi - Apologies for what may well be a stupid question - I am stuck in the noob zone!

I have the Proxmark up and running on Ubuntu.
Firmware is PM3RDV4
Client is:- RRG/Iceman/master/V4.9237-3053-gd8e39b19b

When I try a simple HF Search on an NXP MiFare Classic 1k - I get:-

No Known/supported 13.56 Mhz tags found.

If I HF Tune I can see the mV drop when the card is introduced

HW Status gives me
Anicol Override - std
BCC override - std
CL2 override - std
CL3 override - stdRATS override - standard

Only issues may be in VARIOUS with DBGLEVEL - 1 (ERROR)

I just want to copy a simple standard 1k card.... where am I going wrong?

iceman

Administrator

Registered: 2013-04-25

Posts: 9,537

Website

Re: Cannot Read a 1K Mifare Cassic

....  14a usually wants some distance between tag and antenna.  About 1-2cm,  I tend to use a post-it block.

Bearit641

Contributor

Registered: 2021-02-01

Posts: 4

Re: Cannot Read a 1K Mifare Cassic

Hey thanks but that doesn’t seem to fix it... if I do a hf  14a info what would I expect to see as a return?

Last edited by Bearit641 (2021-02-15 22:55:45)

Bearit641

Contributor

Registered: 2021-02-01

Posts: 4

Re: Cannot Read a 1K Mifare Cassic

Is there a way to check that the Proxmark unit is properly functional? It appears to work. The TUNE command seems to give reasonable results, but I just cannot read a tag...if there a way to test if its me or the unit?